The bag making machine is a machine for making various plastic packaging or other material packaging bags. Its processing range is various sizes of plastic or other material packaging bags with different thickness and specifications. During the use of the bag making machine, there will be many problems. This article will help you to eliminate the use of the bag making machine.
1. The cold cutter of the flat mouth machine cuts continuously
When the cold cutting knife of the flat machine is always cutting continuously, check whether the cutting knife is sharp and whether it needs to be re-sharpened; check whether the balance of the upper and lower knives is appropriate balance.
2. The flat mouth machine cuts three or more strips, and the size of the bag is different.
Put a layer on the rubber roller behind the thin film, so that it can be evenly mixed with other materials.
3. The spring of the flat mouth machine is broken
If the self-adhesive strip is not in place, if it is tilted up and rolled into the spring, the spring will break, so the self-adhesive strip must be pasted properly during operation. Another reason is that the material is not neat or stuffed into the rubber roller, causing the spring to break.
3. There is a big difference between the two sides of the edge sealing of the bone bag making machine
It is necessary to adjust the aluminum pressure roller well, and adjust it to press both sides of the sealing edge, so as to avoid this situation.
4. The self-adhesive strips cut by the side sealing machine often stick to the conveyor belt
The self-adhesive strip is misplaced and stuck to the conveyor belt. It is necessary to adjust the self-adhesive position of the edge correcting machine behind.
5. There are burrs on the OPP cutting edge or the explosion-proof edge will be rotten
…
For more information about frequently asked questions about the use of paper bag packaging machines, please click to visit:https://www.lyhuatianm.com/products-information/bag-making-machine-failure.html
