The square bottom bag is also called the paste bottom bag. The mouth can be sewn after filling. The open square bottom bag is widely used in the food industry. This kind of paper bag is produced by the square bottom machine. Then the installation and debugging of the bottom of the square bottom machine If you know the method, let’s take a look at it in detail.
Bottom installation of square bottom machine
1. Understand the attachment
There are many operating accessories at the bottom of the bottom paste machine, and the installation positions are also different. In order to master the operation skills of bottom stickers as soon as possible, you should memorize the names, installation positions and usage methods of various accessories. On this basis, it can be used flexibly. In order to change the paper shape at will in the future, various accessories can be quickly and accurately installed in place, and the bottom paste work can be completed with high quality.
2. Pull up and bend at the bottom
The folded corner of the paste bottom hook is at the cutting position of the straight line and the arc of the bending plate. When the bottom paste hook pulls up the bottom of the paper and bends it, immediately press and bend the bottom of the bottom of the paper. At the same time, the position of the lower support board should be adjusted so that the bottom sticker can be strongly supported when it is hooked to the bottom, and a special paper pressing rod should be installed so that the folded cardboard will not be left behind the bottom sticker hook and the pressing board. Rebound, after sizing and pressing by the sizing roller, it is smoothly fed into the folding part for folding.
…
For more details click to visit:https://www.lyhuatianm.com/products-information/installation-and-adjustment-method-of-the-bottom-of-the-square-bottom-machine.html
